28 spanning-tree mst configuration, 29 instance – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 149
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 149 of 855
7.28 spanning-tree mst configuration
Use this command to enter mst configuration mode.
Command Syntax
spanning-tree mst configuraiton
Command Mode
Global configuration
Default
Usage
Examples
Switch# configure terminal
Switch(config)# spanning-tree mst configuration
Switch(config-mst)#
Related Commands
7.29 instance
Use this command to create an mstp instance and map VLANs to an MST instance
Command Syntax
instance instance-id vlan vlan-id
no instance instance-id vlan vlan-id
instance-id
Instance id, we support at most 16 instances.
vlan-id
The vlan we associated with instance must be created first. The range is 1 to
4094.
Command Mode
mst configuration mode
Default
Usage
When you map VLANs to an MST instance, the mapping is incremental, and the VLANs specified in
the command are added to or removed from the VLANs that were previously mapped.