8 ip pim ignore-rp-set-priority – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 442
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 442 of 855
ip pim hello-interval interval
no ip pim hello-interval
interval
: <1-65535> the pim hello message interval (second)
Command Mode
Interface configuration
Defaults
30 seconds
Usage
None
Examples
This example shows how to set the pim hello message interval to 100s.
Switch(config-if)#ip pim hello-interval 100
This example shows how to return the pim hello message interval to default value.
Switch(config-if)#no ip pim hello-interval
Related Commands
None
24.8 ip pim ignore-rp-set-priority
Use this command to ignore RP set priority value.
To not ignore the priority, use the no form of this command.
Command Syntax
ip pim ignore-rp-set-priority
no ip pim ignore-rp-set-priority
Command Mode
Global configuration
Defaults
Not ignore
Usage
None
Examples
This example shows how to ignore RP set priority value.
Switch(config)#ip pim ignore-rp-set-priority
This example shows how to return the configurations to default value.