6 show channel-group detail – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 87
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 87 of 855
Examples
This example shows how to display a summary of all of the channel groups:
Switch# show channel-group summary
Flags: s - suspend I - stand-alone
D - down/admin down B - in Bundle
R - Layer3 S - Layer2
H - standby
w - wait U - in use
Aggregator Name Protocol Ports
----------------+------------+--------------------------------------------
agg10(SU) LACP eth-0-9(B) eth-0-10(B)
agg250(SU) LACP eth-0-11(B) eth-0-12(B)
This example shows how to display a summary of a specified channel group:
Switch# show channel-group 10 summary
Flags: s - suspend I - stand-alone
D - down/admin down B - in Bundle
R - Layer3 S - Layer2
w - wait U - in use
T - standby
Aggregator Name Protocol Ports
----------------+------------+--------------------------------------------
agg10(SU) LACP eth-0-9(B) eth-0-10(B)
Related Commands
None
5.6 show channel-group detail
Use this command to display detailed information of all of the channel groups, or a specified