4 configuring a maintenance association – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 190
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 190 of 855
Command Mode
Configure mode
Default
None
Usage
The MD level. To configure the level, enter a value in the range 0 to 7. The levels define the MD as
follows:
0~2 (operator levels)
3~4 (provider levels)
5~7 (customer levels)
Examples
Switch#configure terminal
Switch(config)# ethernet cfm enable
Switch#configure terminal
Switch(config)# no ethernet cfm enable
Related Commands
10.4 Configuring a Maintenance Association
Use the command to define an MA within an MD.
Command Syntax
service CSI_ID vlan VLAN_ID
no service CSI_ID vlan VLAN_ID
Command Mode
Ethernet-cfm configuration mode
Default
None
Usage
Related Commands
ethernet cfm domain DOMAIN_NAME level LEVE