CANOGA PERKINS CanogaOS Command Reference - Manual (Page 797)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 797 of 855
Related Commands
logging server
40.71 logging server facility
To configure the syslog facility in which error messages are sent, use the logging server facility
command in global configuration mode. To revert to the default of local7, use the no form of this
command.
Command Syntax
logging server facility facility-type
no logging server facility
facility-type Syslog facility. See the “Usage” section of this command reference entry
for descriptions of acceptable keywords.
Command Mode
Global configuration
Default
Default is local7.
Usage
The following table describes the acceptable keywords for the facility-type argument.
Examples
The following is sample output from the logging file command.
Switch(config)# logging server facility local3
Related Commands
logging server
40.72 logging server severity
To set severity level while writing logs into servers, use the logging server severity command in
global configuration mode. To revert to the default severity level, use the no form of this command.
Command Syntax
logging server severity {alert | critical | debug | emergency | error | information | notice | warning
| severity-level}
no logging server severity
{0 | emergency} System is unusable.