CANOGA PERKINS CanogaOS Command Reference - Manual (Page 602)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 602 of 855
30.8 no vpls-mtu
Use this command to unset mtu for VPLS instance.
Command Syntax
no vpls-mtu
Syntax Description
This command has no arguments or keywords.
Command Mode
VPLS mode
Defaults
This command has no default settings.
Examples
In the following example, the no vpls-mtu command is used to unset mtu for VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)# no vpls-mtu
Related Commands
vpls-mtu