CANOGA PERKINS CanogaOS Command Reference - Manual (Page 492)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 492 of 855
25.33 show debugging ldp
Use this command to display the status of the debugging of the LDP system.
Comm a nd Syntax
show debugging ldp
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Examples
In the following example, the show debugging ldp command is used to display the status of the
debugging of the LDP system:
Switch # show debugging ldp
LDP debugging status:
LDP event debugging is on
LDP packet debugging is on
LDP finite state machine debugging is on
LDP pdu hexdump debugging is on
LDP downstream state machine debugging is on
LDP upstream state machine debugging is on
LDP trunk state machine debugging is on
LDP QoS debugging is on
LDP CSPF debugging is on
LDP VC USM debugging is on
LDP VC DSM debugging is on
LDP NSM debugging is on
LDP Advertise-labels debugging is on
Related Commands