17 trust cos, 18 replace cos – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 637
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 637 of 855
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure the port trust state to port.
Switch(config-if)# trust port
Related Commands
no trust
32.17 trust cos
Use this command to configure the port trust state to port to classify ingress packets with the packet
COS values.
Command Syntax
trust cos
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to configure the cos trust state to port.
Switch(config-if)# trust cos
Related Commands
no trust
32.18 replace cos
Use this command to replace the cos field in packets on egress.
To remove this setting, use the no form of this command.
Command Syntax
replace cos