CANOGA PERKINS CanogaOS Command Reference - Manual (Page 156)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 156 of 855
eth-0-1: Version Multiple spanning tree protocol - Received None - Send MSTP
eth-0-1: No edgeport configured - Current edgeport off
eth-0-1: Edgeport bpdu-guard Default - Current edgeport bpdu-guard on
eth-0-1: Edgeport bpdu-filter Default - Current edgeport bpdu-filter off
eth-0-1: No root guard configured - Current root guard off
eth-0-1: Configured Link Type auto - Current point-to-point
Related Commands
7.37 show spanning-tree brief
Use this command to show the brief state of the spanning tree.
Command Syntax
show spanning-tree brief
Command Mode
Privileged Exec modes
Default
Usage
Examples
The following is an output of this command displaying the brief state of the spanning tree. The down
interface should not be show.
Switch# show spanning-tree brief
Multiple spanning tree protocol Enabled
Root ID Priority 32768 (0x8000)
Address 34f2.d317.ce01
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768 (0x8000)
Address 34f2.d317.ce01
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300 sec
Interface Role State Cost Priority.Number Type
------------------------------------------------------------------------
eth-0-2 Designated Forwarding 20000 128.2 P2p
eth-0-3 Designated Forwarding 20000 128.3 P2p
eth-0-4 Designated Forwarding 20000 128.4 P2p
eth-0-5 Designated Forwarding 20000 128.5 P2p