CANOGA PERKINS CanogaOS Command Reference - Manual (Page 110)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 110 of 855
Partner's information:
LACP port Admin Oper Port Port
Port Flags Priority Dev ID key Key Number State
eth-0-10 FA 32768 ca9c.e21d.a301 0 199 0x55 0x3f
This example shows how to display details of the LACP port of a specified channel group:
Switch# show channel-group 1 port
Ports in the group:
-------------------
Port: eth-0-11
------------
Port state = Up In-Bndl
Channel number = 1 Protocol = LACP Channel-gorup = agg1
Port index = 90 Mode = Active
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Local information: