4 no mpls ftn-entry – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 521
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 521 of 855
26.4 no mpls ftn-entry
Use this command to remove one static FTN entry.
Command Syntax
no mpls ftn-entry {A.B.C.D M.M.M.M | A.B.C.D/M} A.B.C.D
Syntax Description
A.B.C.D
M.M.M.M
FEC for FTN entry.
A.B.C.D/M
FEC for FTN entry.
A.B.C.D
Nexthop ip address.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls ftn-entry command is used to remove one static FTN
entry:
Switch# configure terminal
Switch(config)# no mpls ftn-entry 200.200.200.0/24 12.12.12.2
Related Commands
mpls ftn-entry
Advertising