44 show ldp targeted-peers – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 507
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 507 of 855
25.44 show ldp targeted-peers
Use this command to display the list of targeted peers configured on the current LSR.
Command Syntax
show ldp targeted-peers
Syntax description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Examples
In the following example, the show ldp targeted-peers command is used to display the list of
targeted peers configured on the current LSR:
Switch# show ldp targeted-peers
IP Address Interface
1.1.1.3 eth-0-9
Related Commands
Advertising