CANOGA PERKINS CanogaOS Command Reference - Manual (Page 527)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 527 of 855
Command Syntax
mpls disable-all-interfaces
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
Label switch function is disabled.
Examples
In the following example, the mpls disable-all-interfaces command is used to disable all the L3
interfaces’ label switch function:
Switch# configure terminal
Switch(config)# mpls disable-all-interfaces
Related Commands
mpls enable-all-interfaces
26.11 label-switching
Use this command to enable an interface’s label switch function.