CANOGA PERKINS CanogaOS Command Reference - Manual (Page 503)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 503 of 855
25.42 show ldp session
Use this command to display sessions established between the current LSR and other LSRs.
Command Syntax
show ldp session [A.B.C.D]
Syntax description
A.B.C.D The IPv4 address of the peer for which information is to be
shown.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp session command is used to display sessions established
between the current LSR and other LSRs:
Switch# show ldp session
Peer IP Address IF Name My Role State KeepAlive
192.168.11.50 eth1 Passive OPERATIONAL 30
192.168.13.60 eth2 Passive OPERATIONAL 30
In the following example, the show ldp session command is used to display sessions established
between the current LSR and other LSRs:
Switch# show ldp session 192.168.3.5
Session state : OPERATIONAL
Session role : Passive
TCP Connection : Established
IP Address for TCP : 192.168.3.5
Interface being used : eth1