6 vrf – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 358
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 358 of 855
18.5.1.1 Command Syntax
threshold seconds
no threshold
18.5.1.2 Syntax Description
seconds
Time range is from 1 to 4800.
Frequency ≥ timeout ≥ threshold
18.5.1.3 Command Mode
Ipsla mode
18.5.1.4 Defaults
Default value is 5 seconds.
18.5.1.5 Examples
In the following example, the threshold command is used to set the threshold time range:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)# threshold 10
18.5.1.6 Related Commands
show ip sla monitor
18.6 VRF
To use IP SLA operations in VPNs, use vrf in ipsla mode.
To remove VPN feathers from IP SLA operations, use the no form of this command.
18.6.1.1 Command Syntax
vrf vrfname
no vrf
18.6.1.2 Syntax Description
vrfname
Vrf name;
18.6.1.3 Command Mode
Ipsla mode
18.6.1.4 Defaults
none