31 time-range – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 684
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 684 of 855
Usage
None
Examples
This example shows how to show the information of IP ACL.
Switch# show access-list ip
ip access-list list_ipv4_1
2 permit tcp host 1.1.1.1 any
3 deny icmp any any
12 permit tcp any any
22 redirect interface eth-0-0 any any any
Related Commands
ip access-list
33.31 time-range
Use this command to create time range.
Command Syntax
(no) time-rang time-range-name
time-range-name: the name of the time range, up to 20 characters
Command Mode
Global configuration
Usage
None
Examples
This example shows how to create a time range with the name “my-time-range”.
Switch(config)#time-range my-time-range
Switch(config-tm-range)#
Related Commands
<1-2147483646> permit
<1-2147483646> deny