CANOGA PERKINS CanogaOS Command Reference - Manual (Page 747)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 747 of 855
There is no host-key defined.
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH host key on your switch:
Switch(config)# ip ssh serverhost-key rsa key KEY1
Related Commands
show ip ssh server status
40.6 ip ssh server rekey-interval
To configure Secure Shell (SSH) rekey interval on your switch, use the ip ssh server rekey-interval
command in global configuration mode. To restore the default value, use the no form of this command.
Command Syntax
ip ssh server rekey-interval minute
no ip ssh server rekey-interval
minute The rekey interval, with a maximum of 1440 minutes.
Default
The default interval is 60 minutes.
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH rekey interval on your switch:
Switch(config)# ip ssh server rekey-interval 30
Related Commands
show ip ssh server status