Digi NS9750 - Manual (Page 80)

S y s t e m c o n t r o l p r o c e s s o r ( C P 1 5 ) r e g i s t e r s
5 6 N S 9 7 5 0 H a r d w a r e R e f e r e n c e
R0: Cache type register
R0: Cache type is a read-only register that contains information about the size and
architecture of the instruction cache (ICache) and data cache (DCache) enabling
operating systems to establish how to perform operations such as cache cleaning and
lockdown. See "Cache features" on page 105 for more information about cache.
You can access the cache type register by reading CP15 register R0 with the
opcode_2
field set to 1. Note this example:
MRC p15, 0, Rd, c0, c0, 1; returns cache details
Figure 12 shows the format of the cache type register. Table 21 describes the fields in
the register.
Figure 12: Cache type register format
Field Description
Ctype Determines the cache type, and specifies whether the cache supports lockdown and how it is
cleaned. Ctype encoding is shown below; all unused values are reserved.
Value: 0b1110
Method: Writeback
Cache cleaning: Register 7 operations (see "R7: Cache Operations register" on page 64)
Cache lockdown: Format C (see "R9: Cache Lockdown register" on page 69)
S bit Specifies whether the cache is a unified cache (S=0) or separate ICache and DCache (S=1).
Will always report separate ICache and DCache for NS9750.
Dsize Specifies the size, line length, and associativity of the DCache.
Isize Species the size, length and associativity of the ICache.
Table 21: Cache type register field definition
Ctype 0 S Dsize
31 28 25 24 23 12
0 0 Isize