Yaskawa MP920 Motion Module - Manual (Page 119)

3.2 Individual Module Definitions
3-11
3
„ Saving Motion Parameter
Use the following procedure to save motion parameters.
1. Select File (F) and then Save (S) in the Motion Parameter Window.
2. Click the Yes button in the following message box.
„ Setting Setting Parameters
Use the following procedure to set the setting parameters.
1. Click the Set Parameter Tag to display the Set Parameter Tag Page.
2. Set the setting parameters as necessary. Because these parameters can be changed from
ladder logic programs or motion programs, they do not necessarily have to be set here.