Yaskawa MP920 Motion Module - Manual (Page 146)

5 SVA Module Specifications and Handling
5.1.2 Handling
5-4
„ LED Indicator
The STATUS indicator is a 7-segment LED indicator that displays the RUN/error status of
the SVA-01A Module. The following table shows the indicator display patterns.
STATUS
Display Category Meaning
Hardware reset The SVA-01A Module is in hardware reset status.
Initializing This display appears one to six seconds after the SVA-01A
Module is turned ON or reset.
Normal
operation One of servo numbers 1 to 16 will be displayed. The Servo
Module is operating normally.