IDEC High Performance Series - Manual (Page 1027)

WindO/I-NV2 User’s Manual 21-7
3 Sound Settings Dialog Box
21
Sound F
unction
■ Settings
Displays a list of the settings for sound files used by MICRO/I.
■ Change Volume Level
Adjust the volume (0 to 31) of the sound file played by the MICRO/I.
The volume changes according to the value of the specified Device Address.
The sound is muted when the Device Address value is 0, and the volume is maximum when the value is 31 or out of range.
Enter the Device Address in the text box or click to specify the address in the displayed Device Address
Settings dialog box. For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-67.
■ Enable Mute
Mute the volume of the sound file played by the MICRO/I.
When the value of the specified Device Address is 1, the sound is muted.
When the sound is muted while a sound file is playing, it continues playing without making a sound.
Enter the Device Address in the text box or click to specify the address in the displayed Device Address
Settings dialog box. For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-67.
■ Error information
Displays error information when sound settings are invalid.
■ Clear Error Info. button
Click to clear the error information.
ID: Shows the sound ID (1 to 1024) of the sound file to play.
When a sound file has been assigned, you can change the ID by clicking the cell.
File Name:
Shows the sound file name that was set with .
Click the button to display the Open dialog box. Then specify a sound file with the Open
dialog box.
The operating procedure is the same as when the
button is clicked.
Size: Shows the size of the sound file displayed in File Name.
Save To: Select the location to save the sound file to as Int. Memory or Memory Card.
Double click the cell to change.
Trigger Condition: Select Device Address or None for the condition to play the sound file.
Double click the cell to change.
Use trigger device: Plays the sound file according to the Device Address's value.
None: Select when playing a sound file as a touch sound.
Trigger Device: When Trigger Condition is Device Address, specify the Device Address that will be used as the
condition to play the sound file.
Double click on the cell or click to specify the address on the displayed Device Address
Settings dialog box. For the device address configuration procedure, refer to Chapter 2 “5.1
Device Address Settings” on page 2-67.
The address cannot be specified when Trigger Condition is None.
The maximum number of Host Devices that can be used as trigger devices is 128. However, when the bits
of a word device are specified, if those bits are in the same word device, it counts as one device even when
multiple bits are used.
Repeat: Specifies whether the sound is repeated or not.
Enable: Repeat playing the sound until the trigger condition is no longer satisfied.
Disable: Play the sound only once.