IDEC High Performance Series - Manual (Page 698)

2 Line Chart
11-26 WindO/I-NV2 User’s Manual
■ Scroll *3
*1 HG2G-5F, HG3G/4G only
*3 Advanced mode only
Control Display Update and Scrolling: To scroll the chart to display past data and to display the cursor, the chart
display updating must be stopped. To control updating the display, select this
check box and specify the bit device or bit of the word device to control the
display.
Click to display the Device Address Settings dialog box. For the device
address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-67.
Display updating stops when the device value changes from 0 to 1. Display
updating restarts when the device value changes from 1 to 0.
This option can only be configured when Log Trend (Normal) or Log Trend
(Pen Recorder) is selected for Chart Type.
Right Scroll Device, Left Scroll Device: The chart can be scrolled to the right or to the left when display updating is
stopped. This option specifies the bit device or bit of the word device to scroll
the chart left or right.
Click to display the Device Address Settings dialog box. For the device
address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-67.
The chart scrolls right or left one point of data each time the device value
changes from 0 to 1.
These options can only be configured when the Control Display Update and
Scrolling check box is selected.
Display cursor *1 : The cursor can be displayed when display updating is stopped. The cursor is
displayed on the chart. Select this check box to display the cursor. The Date
and Time (Cursor) tab is displayed where the functions related to the cursor,
such as the cursor style and display position control, can be configured.
This option can only be configured when the Control Display Update and
Scrolling check box is selected.
1
0
Right scroll device
LM 0 value
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
0
20
40
60
80
100
-20
120
Scroll right
1 data point
Stop updaƟng
Scroll right
1 data point
Scroll right
1 data point
Stop updaƟng,
then scroll right
3 data points