IDEC High Performance Series - Manual (Page 117)

WindO/I-NV2 User’s Manual 3-15
5 User Communication
3
Communic
ation
14 Set the data, and then click OK.
The data configured in Command is displayed.
15 Repeat steps 12 through 14 to set all the data for the transmission command.
16 Click OK.
The transmission command configured under Protocol is displayed.
17 Specify Receive (RXD) command.
Click Edit.
The data are displayed in Command in the order they were set. To change the order of data, select data,
and then click Up or Down to shift it.