IDEC High Performance Series - Manual (Page 108)

4 No Host
3-6 WindO/I-NV2 User’s Manual
4.1 Overview
In this case, there is no communication with an external device, so the MICRO/I operates as a standalone unit.
It is only possible to operate the MICRO/I with relays and registers.
4.2 No Host Settings
No Host settings are selected on the Select Host I/F Driver dialog box, or the Change Host I/F Driver dialog box.
• When creating new project data by following displayed dialog boxes and configuring settings step by step, by
clicking , and then clicking New, the Select Host I/F Driver dialog box is displayed. For details, refer to
Chapter 4 “Create new project data by using the interactive quick start” on page 4-1.
• Click Host I/F Driver on the status bar to display the Change Host I/F Driver dialog box. For details, refer to
Chapter 4 “Changing Host I/F Drivers” on page 4-22.
Select IDEC HG System in Manufacturer, and then select No Host in Protocol.
4 No Host
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
MICRO/I
Internal device
No external device