IDEC High Performance Series - Manual (Page 93)

WindO/I-NV2 User’s Manual 2-63
4 Customizing WindO/I-NV2
2
WindO/I
-NV2 F
eatures & B
asic Oper
ations
●
Edit tab
■ Mode Settings
When placing a part on the screen, select whether or not to display the part’s Properties dialog box.
■ Properties Setting
Select whether or not to display the Properties dialog box for parts in the Advanced mode.
■ Enable Increment Address
When copying or duplicating parts, select this check box to add a specified value (-999 to 999) to the device address
set for the original part before pasting it to the screen.
■ Enable Increment Station No.
When copying or duplicating parts, Select this check box to add a specified value (-999 to 999) to the device station
number set for the original part before pasting it to the screen.
This option can only be configured if the host I/F driver Connection is 1:N Communication.
■ Enable Text Auto Resizing
Select this box to automatically change the text size according to a change in part size.
■ Minimize the Properties dialog box by clicking Preview button
Select this box to minimize an object's Properties dialog box when you click the Preview button on its properties
dialog box.
■ Auto-change IME
Select this box to enter characters other than alphanumeric characters using the input method editor (IME) in text
boxes for entering device addresses.
■ Bit Number Symbol
Select the separator for addresses and bits. When manually entering device address, you can enter either separator,
but they will be displayed using the symbol selected here.
■ Workspace Setup
Displays the Workspace Setup dialog box. You can configure items displayed in the workspace window. For details,
refer to “4.2 Customizing the Workspace” on page 2-65.
Placement First: The part’s Properties dialog box is not displayed. This mode is for placing the parts on the screen
and finishing the screen’s design first.
Settings First: Displays the part’s Properties dialog box. This mode is for creating the screen while configuring the
Properties for the parts.
Basic: Displays the Properties dialog box in Basic mode to use only basic functions.
Advanced: Displays the Properties dialog box in Advanced mode so that all functions can be used.
You can also change the mode by clicking on the Advanced button and the Basic button in the Properties
dialog box for parts.
You cannot enter full-width characters in text boxes that only accept alphanumeric input, even if the IME is
enabled.
Select this box to use full-width characters in tag names in the device address settings.
Dot (WindLDR Format): Separates the address and bit with a dot.
Example: D100.00
Dash (WindO/I-NV2 Format): Separates the address and bit with a dash.
Example: D100-0