IDEC High Performance Series - Manual (Page 1205)

WindO/I-NV2 User’s Manual 28-11
1 Project Transfer Function
28
Data T
ransf
er Func
tion
12 Press Ack to close the results screen.
You are returned to the top page of system mode.
For the HG2F/3F/4F
1 Create project data for project transfer and save it to a CF card.
For details, refer to “1.3 Converting Project Data for Transfer” on page 28-3.
2 Insert the CF card in the MICRO/I.
3 Press the upper-left edge and the upper-right edge of the MICRO/I screen simultaneously.
The maintenance screen is displayed.
4 Press System Mode.
MICRO/I switches to system mode.
Download MICRO/I Project
Function
The following function completed
Result
Ack
HG2F HG3F HG4F
CF Card
MICRO/I
HG2F HG3F HG4F
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Back Light
When downloading a project configured with security to the MICRO/I, the password screen is displayed.
Select a user name and enter its password. For details, refer to Chapter 23 “User Accounts and the Security
Function” on page 23-1.