2 project settings configuration procedure, Project settings configuration procedure -25, Project set tings – IDEC High Performance Series User Manual
Page 211: 2project settings configuration procedure
Advertising
WindO/I-NV2 User’s Manual
4-25
2 Project Settings Configuration Procedure
4
Project Set
tings
The Project Settings dialog box is used to configure MICRO/I operations and functions for the project overall.
This section describes the configuration procedure for project settings.
1
On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
2
Change the settings on each tab as necessary.
2
Project Settings Configuration Procedure
HG3G
HG2G-5F
HG2G-5S
HG2G-S
HG4G HG1F HG2F HG2S HG3F HG4F
Advertising
This manual is related to the following products: