IDEC High Performance Series - Manual (Page 1308)

3 Settings
33-8 WindO/I-NV2 User’s Manual
The followings are displayed in the HG2G-S/-5S/-5F, HG3G/4G. Description between the parentheses are displayed in
the HG1F/2F/2S/3F/4F.
3.1 Initial Setting (Initial Setting)
Pressing the “Initial Setting” button in the System Menu screen displays the setup screen. You can use this screen to
input the settings for MICRO/I operation and communication parameters, and to clear the logs. To return to the
System Menu screen, press the “Main Menu” button at the top of the screen.
●
System Operation (System Operation)
Pressing the “System Operation” button displays the system operation menu screen. You can use this screen to set
the items below. Press the button for each item to set it.
■ Backlight
Backlight Control
Set the amount of time (in minutes) until the backlight brightness is reduced automatically when the screen is not
touched or switched.
Auto Backlight OFF
Set the amount of time (in minutes) until the backlight turns off automatically when the screen is not touched or
switched.
Procedure
1 Press the left/right buttons to select the item, and then enter the time until the backlight brightness is reduced
automatically with the numeric keys.
2 Press the “ENT” button to confirm the entered value. The value set for Backlight Control is displayed.
3 Press the left/right buttons to select the item, and then enter the time until the backlight automatically turns off with
the numeric keys.
4
Press the “ENT” button to confirm the entered value. The value set for Auto Backlight OFF is displayed.
5 Press the “SAVE” button to save the settings.
■ Auto Backlight OFF (Auto OFF)
This item sets the amount of time (in minutes) until the backlight turns off automatically when the screen is not
touched or switched for a preset amount of time. Set the time using the Keypad. Then press “ENTER”. Press the
“CANCEL” button to cancel the entered value and display the currently set value.
3 Settings
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
• To return to the initial settings screen, press the “Init Set” button at the top of the screen.
• To return to the system operation menu screen from any of the settings screens below, press the “System
Opn” button at the top of the screen.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
• If you switch to another screen or change the value before pressing the "SAVE" button, the settings are
not saved.
• Functions with the time set to 0 are disabled.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
• The setting is not updated if you display another screen before pressing the “ENTER” button.
• Setting a time of 0 disables the backlight auto OFF function.