IDEC High Performance Series - Manual (Page 1109)

WindO/I-NV2 User’s Manual 24-17
2 Downloading
24
Online F
unction
■ Clear HG Keep Register (LKR) and HG Keep Relay (LK) *1
Select this check box to clear the HG Keep Register and HG Keep Relay after the project data is downloaded. Note
that when a project data with a changed data storage area setting is downloaded, the HG Keep Register and HG Keep
Relay are always cleared.
For the HG1F/2F/2S/3F/4F, these are always cleared when downloading the project data.
■ Download Recipe Files to Memory Card *2
Select this check box to create a RECIPE folder or recipe files in the Memory Card Folder on an external memory
inserted in the MICRO/I when downloading projects. Only on channels for which Save to in the Recipe Settings
dialog box is set to Memory Card, and Recipe Function is set to Use.
• When Download Data is set to All, recipe files are created for all channels for which recipe data is set.
• When Download Data is set to Modified Data Only, only recipe files on channels where recipe data has
changed are created.
• When Download Data is set to Select Files, no recipe file is created.
■ Download Picture Files to Memory Card *2
Select this check box to create the PICTURE folder under the Memory Card Folder on the external memory inserted
in the MICRO/I and to save the picture files when downloading project. Out of the pictures registered in Picture
Manager, the picture files that are saved are those picture files that have been selected with the check box on the
picture list.
■ Download Sound Files to Memory Card *3
Select this check box to create the SOUND folder under the Memory Card Folder on the external memory inserted in
the MICRO/I and to save the sound files when downloading project. The sound files that are saved are those with
Save To set to Memory Card under settings in the Sound Settings dialog box.
■ Download
• When Communicate with is set to MICRO/I and Port to USB or Serial, the project data starts downloading.
• When Communicate with is set to MICRO/I and Port is set to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to start the download. For details, refer to “To
download project data” on page 24-8.
• When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to download to, then click OK to start the download.
If Port is set to Ethernet, specify the IP address of the master via which to download. If Port is Ethernet and
the via Web Server Unit check box is selected, specify the port number of the Web Server Unit connected to the
destination MICRO/I. For details, refer to “To download project data” on page 24-10.
• When Communicate with is set to Memory Card, the Select Drive dialog box is displayed. Select the external
memory drive, then click OK to start the download. For details, refer to “2.3 Downloading Files to an External
Memory Inserted in the MICRO/I” on page 24-19.
■ Cancel
Stops downloading of project data.
*1 HG2G-S/-5S/-5F, HG3G/4G only
*2 HG2G-5F, HG3G/4G, HG2F/3F/4F only
*3 HG2G-5F, HG3G/4G only
Do not turn off the MICRO/I while project data is downloading.
• If project data downloading fails and communication is not possible, turn the MICRO/I off and on then
download the data once again.
• During communication with an O/I Link Slave using the online function, O/I Link Master operation is
stopped.