IDEC High Performance Series - Manual (Page 1104)

1 Communicating with the MICRO/I
24-12 WindO/I-NV2 User’s Manual
●
IP Address Manager
You can register target Ethernet settings for performing online function via Ethernet communication to the project
data.
■ IP Address List
Ethernet settings registered in the project data are displayed in this list.
■ IP Address
Enter the IP address to register in the project data.
■ Subnet Mask
Enter the subnet mask to register in the project data.
■ Default Gateway
Enter the default gateway to register in the project data.
■ Comment
Enter comment to register in the project data.
■ Port Number
Specify the port number (0 to 65535) of the Web Server Unit connected to the destination MICRO/I that will the
operational target.
This can only be set when Ethernet is selected for Port and the via Web Server Unit check box is selected in the
Communication Settings dialog box.
■ Add New
Adds IP Address, Subnet Mask, Default Gateway, and Comment to the list.
■ Delete
Deletes the selected IP address from the list.
■ Select
Closes IP Address Manager, and apply the Ethernet settings selected from the list.
IP Address: Displays the IP address.
Subnet Mask: Displays the subnet mask.
Default Gateway: Displays the default gateway.
Comment: Displays comment.
Port No.: Displays the port number of the Web Server Unit connected to the MICRO/I.
This can only be set when Ethernet is selected for Port and the via Web Server Unit
check box is selected in the Communication Settings dialog box.
Search: Displays the Search IP Address dialog box.
Searches for Web Server Units connected to MICRO/Is and shows the IP address of the Web
Server Units.
For details, refer to “Search IP Address dialog box” on page 24-13.