IDEC High Performance Series - Manual (Page 278)

4 Popup Screen
5-26 WindO/I-NV2 User’s Manual
■ Security Group
Select a security group to restrict displaying the screen.
This option can only be set when Use Security functions is selected. The Use Security functions check box is set
on General tab in the Security dialog box.
Click to display the Security Group Settings dialog box. If you create a security group on the Security Group
Settings dialog box, you can select that created group. For details, refer to Chapter 23 “2.2 Adding and Editing
Security Groups” on page 23-18.
None: Any user can open this screen.
Administrator, Operator,
Reader, (Created security group): Only selected users can open this screen.
For details about the security function, refer to Chapter 23 “User Accounts and the Security Function” on
page 23-1.
• On the HG2S with CC switches, buttons placed on the screen may not correctly operate depending on
the display position of the Popup Screen. This is because the touch grid pattern for the HG2S with CC
switches differs between the area with the CC switches and the center area.
Adjust the display position of the Popup Screen so that its buttons are displayed in touch switch areas.
• Configure the Popup Screen as described below to place buttons in the CC switch area.
- Make the size of the Popup Screen the same as the Base Screen.
- Clear the Title Bar.
- Set the display position for the button (Goto Screen Button or Multi-Button) to display the Popup
Screen to X=0, Y=0.
Touch switch area
CC switch areas