IDEC High Performance Series - Manual (Page 1112)

2 Downloading
24-20 WindO/I-NV2 User’s Manual
5 Select the file, and then click Open.
• When Communicate with is set to MICRO/I and Port to USB or Serial, the project data starts downloading.
• When Communicate with is set to MICRO/I and Port to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to start the download. For details, refer to “To
execute any function except project data download” on page 24-9.
• When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to download to, then click OK to start the download.
If Port is set to Ethernet, specify the IP address of the master via which to download. If Port is Ethernet and
the via Web Server Unit check box is selected, specify the port number of the Web Server Unit connected to the
destination MICRO/I. For details, refer to “To execute any function except project data download” on page 24-11.
6 Click Yes.
The Memory Card Maintenance dialog box is displayed and the file starts downloading.
When finished downloading, a completion message is displayed.
7 Click OK.
If security is enabled in the MICRO/I project, the Password Screen is displayed. Select the user name and
enter the password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.