IDEC High Performance Series - Manual (Page 1314)

3 Settings
33-14 WindO/I-NV2 User’s Manual
●
(CF Card)
Press the “CF Card” button to display the CF card menu screen. You can set the items below from this screen. Press
the button for each item to set it. This feature is only supported by models with a compact flash interface.
■ (HG to CF Card)
Copies project data, font data, and runtime system software from the operator interface to the CF Card.
Set as directed by the confirmation message that appears. Pressing the “NO” button will return you to the CF card
menu screen without executing the copy operation.
■ (Copy from CF Card)
Copies the project data, font data and system software from the CF card to MICRO/I’s internal memory. Press the
or button to select the CF card access folder containing the project data.
Set as directed by the confirmation message that appears. Pressing the “NO” button will return you to the CF card
menu screen without executing the copy operation.
■ (Initialize)
Formats the CF card.
Set as directed by the confirmation message that appears. Pressing the “NO” button will return you to the CF card
menu screen without executing the copy operation.
■ (Stop Access)
Press the "Stop Access" button to stop accessing to the CF card.
The CF access lamp will flash and then go off, and then MICRO/I will stop accessing to the CF card.
The Access Stop Switch (red button) at the rear of the operator has the same function.
3.2 Clock Setting (Clock Set)
Press the “Clock Setting (Clock Set)” button in the System Menu screen to display the clock settings screen. Use this
screen to set MICRO/I’s internal clock. To return to the System Menu screen, press the “Main Menu” button at the top
of the screen.
Procedure
1 Press the left/right buttons to select an item, then use the Keypad to enter the date or time.
2 Press the “ENT” or “Enter” button to apply the new setting.
3 Press the “SAVE” button to save the date/time setting. (HG2G-S/-5S/-5F, HG3G/4G)
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
• To return to the initial settings screen, press the “Init Set” button at the top of the screen.
• To return to the CF card menu screen, press the “CF Card” button at the top of the screen.
The CF access folder is set using the WindO/I-NV2 project settings.
The project data can not be read if the data was copied from computer to CF card using Windows Explorer.
In order to download a project to a CF card, use [Home] - [Project] - [Upload] - [Stored Data in Memory
Card].
• The setting is not updated if you display another screen before applying the setting.
• Since the HG2G-5ST22VF-* has no backup battery, the clock data is initialized when the MICRO/I is
turned off.