IDEC High Performance Series - Manual (Page 1435)

WindO/I-NV2 User’s Manual A-23
6 USB Driver
Appendix
6 Click Close.
NVUSB Device appears if the USB driver installs properly.
Windows 7
Follow these steps to install the HG2F USB driver.
1 Connect the USB cable to the USB interface on the MICRO/I (with power supplied) and the USB port on the computer
(computer should be on).
2 The USB driver will install automatically.
The installation is complete when Device driver software installed successfully. appears in the notification area.
The USB interface on the HG2F supports only the 32-bit edition of Windows 7. It does not support the 64-bit
edition.
HG2F
MICRO/I
Computer
USB cable
A plug Mini-B plug
To USB port To USB interface