IDEC High Performance Series - Manual (Page 240)

3 Project Settings Dialog Box
4-54 WindO/I-NV2 User’s Manual
■ Monitor the error information of all Station No.s
Select this check box to monitor the error information of all external devices that are being communicated with using
sub host communication.
For details, refer to Chapter 3 “Monitor the error information of all Station No.s” on page 3-82.
■ Monitor the error information of each Station No.:
Select this check box to monitor the error information for each external device that is being communicated with using
sub host communication.
The information for each station is stored starting with the allocated internal device and utilizes 256 words of
addresses.
The station numbers are allocated with the starting address as number 0, up to number 255.
For details, refer to Chapter 3 “Monitor the error information of each Station No.” on page 3-83.
■ Keep running with skipping the Station No. of Communication Error
Select this check box to temporarily stop communication with the station number where the communication error
occurred and connect to the next station number.
For details, refer to Chapter 3 “Keep running with skipping the Station No. of communication error” on page 3-83.
Set with Auto Increment: Allocates sequential device addresses from the device address configured by Device
Type, Address, Bit, and Station No. to the HG link registers (LLR) after the selected
LLR address.
Delete: Deletes the device address allocated to the HG link register (LLR) from the list.
Select the LLR address on the list and click Delete.
Up: Shifts the device address allocated to the selected HG link register (LLR) up in the list.
Down: Shifts the device address allocated to the selected HG link register (LLR) down in the list.
Import: Displays the Open dialog box.
Select a file with exported device addresses (CSV file) and click Open to collectively
overwrite the LLR addresses under Settings with the device addresses in the selected
file.
Export: Displays the Save As dialog box.
Select the location to save the file, enter a file name, and then click Save to save the
device address details as a CSV file.
(Destination device): Specifies the word device to write the error information to.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
(Top device): Specifies the word device to write the error information to. This option uses 64 words of
addresses starting with the configured device address.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.