IDEC High Performance Series - Manual (Page 1282)

2 USB Flash Drives
30-38 WindO/I-NV2 User’s Manual
(6) Uploading a PLC program file to a USB flash drive.
(7) Displays messages below the menu screen for the USB Autorun function.
[COMMAND_5]
Defines the command assigned to execution button [COMMAND_5].
This is the fifth command that executes when Run All is pressed.
command = LDR_UPLOAD Executes “Upload a PLC program file”.
dst_path = "B: \ Uploaded_Program"
Uploads the PLC program file running on the PLC (station number 0)
connected to the MICRO/I's COM1 port, and saves it in the folder
“Uploaded_Program” on the USB flash drive (B:).
src_port = COM1
src_net_no = 0
title = "Copy PLC program to USB flash drive"
Displays the text “Copy PLC program to USB flash drive” as the
button label.
[COMMENT]
Defines the number of commands to use and details about the
menu screen.
comment = "Press the command to execute."
Displays the text “Press the command to execute.” below the menu
screen.