IDEC High Performance Series - Manual (Page 664)

10 Calendar
10-152 WindO/I-NV2 User’s Manual
■ ON Time
Configures the time to write 1 to the report device according to the type of data.
■ OFF Time
Select this check box to configure the time to write 0 to the report device.
The time is configured according to the type of data.
■ Report Device
Specifies the bit device to write the value to at ON Time and OFF Time.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
• After 1 is written to the report time with ON Time, that value is retained.
• After a screen configured with the Calendar is displayed, if the time is in between ON Time and OFF
Time, 1 is written to the report device.
Value of device retained after ON Time elapses
1
0
09:00 09:30 10:00 10:30 11:00
Report device
M0 value
Time
ON Time
Turn on MICRO/I power
Open screen
1
0
09:00 09:30 10:00 10:30 11:00
Report device
M0 value
Time
ON Time
Writes 1 to noƟfy that ON Time has already elapsed
OFF Time
• The value of report device is retained even when the current time exceeds OFF Time.
• After a screen configured with the Calendar is displayed, if the time exceeds OFF Time, 0 is written to
the report device.
Value of device retained after OFF Time elapses
1
0
10:00 10:30 11:00 11:30 12:00
Report device
M0 value
Time
OFF Time
Turn on MICRO/I power
Open screen
Report device
M0 value
1
0
Time
10:00 10:30 11:00 11:30 12:00
OFF Time
Writes 0 to noƟfy that OFF Time has already elapsed
ON Time