IDEC High Performance Series - Manual (Page 1160)

1 Web Server Function (HG2G-5F, HG3G/4G)
27-2 WindO/I-NV2 User’s Manual
1.3 Minimum System Requirements
Use of the following web browsers is recommended with the web server function.
• Internet Explorer 8.0 or higher
• Firefox 3.0 or higher
1.4 Settings and Access Method
Follow the procedure below to display the HG2G-5F, HG3G/4G web page (homepage) on a web browser.
1 Connect the HG2G-5F, HG3G/4G to a local network.
Connect the HG2G-5F, HG3G/4G’s Ethernet interface to the Ethernet port of the local network’s router or hub with a
LAN cable.
2 Configure the HG2G-5F, HG3G/4G.
• Ethernet settings
 Refer to Chapter 4 “ When Ethernet is selected under Interface Configuration” on page 4-40.
• User account settings
 Refer to Chapter 23 “3 Security Dialog Box” on page 23-33.
• Remote operation & monitoring function settings
 Refer to “Remote Control and Monitoring function settings” on page 27-3.
3 Access the HG2G-5F, HG3G/4G.
Start the web browser on the web browser terminal and access the following URL.
http://(HG2G-5F, HG3G/4G IP address)/
If successfully accessed, the HG2G-5F, HG3G/4G displays the password screen.
4 Enter the user name and password configured in the running project.
Enter the user name and password for a user in the “Administrator”, “Operator”, or “Reader” security group.
When the user name and password are successfully verified, the HG2G-5F, HG3G/4G web page (homepage) is
displayed.
Web browsers other than those recommended can use the web server function, but problems may occur
with features such as automatic updates and displaying images.
Example 1: When the HG2G‐5F, HG3G/4G’s IP address is 192.168.0.1
http://192.168.0.1/
Example 2:
When the HG2G‐5F, HG3G/4G’s IP address is 192.168.0.1 and the web server's port number is 8080
http://192.168.0.1:8080/
User name: The user name configured in the running project. (Default: User)
Password: The alphanumeric password of 4 to 15 characters long configured in the running project. If a password
is not set, leave the password blank.
• An “Administrator” or “Operator” user account is required to open the remote operation page.
• If you do not access the HG2G-5F, HG3G/4G for 5 minutes or more after accessing it, you will be required
to reenter your user name and password.
Some web browsers will remember the user name and password you entered and automatically reenter
them when required until the browser is closed. With this kind of web browser, you are not required to
reenter your user name and password after 5 minutes or more have elapsed since accessing the HG2G-
5F, HG3G/4G.
• The HG2G-5F, HG3G/4G can be accessed simultaneously from multiple web browser terminals. However,
the maximum number of web browsers that can simultaneously access it is five.