IDEC High Performance Series - Manual (Page 202)

1 Creating and Manipulating WindO/I-NV2 Project Data
4-16 WindO/I-NV2 User’s Manual
●
Screen Tab
■ Type
Select the screens to print from the following items.
All, Base Screen, Popup Screen
■ Range
Select the screens to print from the selected type of screen.
■ Image
■ Screen image only
Prints only the screen type, number, and screen image.
■ Detailed List of Parts
Prints part settings for each screen. This can only be selected when Screen image only is cleared.
■ Device List
Prints device settings for each address. This can only be selected when Screen image only is cleared.
All: Prints all the screens.
Current Screen: Prints the selected editing window screen.
Selected Screens: Prints the selected screens. The selected screens are displayed in a list.
Add: Adds a screen to the list.
Click Add to display the Open Screens dialog box. Select Screen Type,
select the screen in Screen List, and then click OK to add the screen to
the list.
Delete: Deletes the screen from the list.
Select the screen in the list and click Delete.
State: Changes the state of the parts for printing. Select the state from the following items.
OFF, ON, ON, OFF (Both)
Zoom: Prints the screen image at the specified magnification (20% to 400%).
Invert white and black: Select this to print the screen by inverting the colors so white is black and black is white.
Overlay Screens: Select this to print the screen by displaying overlay screens.
Show Part Name: Select this to print the screen by displaying part names.
Show Device Address: Select this to print the screen by displaying device addresses.