IDEC High Performance Series - Manual (Page 1427)

WindO/I-NV2 User’s Manual A-15
6 USB Driver
Appendix
Windows XP
Follow these steps to install the HG2G-5F, HG3G/4G USB driver.
1 Connect the USB cable to the USB interface on the MICRO/I (with power supplied) and the USB port on the computer
(computer should be on).
A message Found New Hardware appears, followed by the Found New Hardware Wizard.
2 Select No, not this time and click Next.
3 Select Install the software automatically (Recommended) and click Next.
The Hardware Installation dialog box is displayed.
• For Windows XP, follow the same procedure for installing the USB driver as for the HG2G-5F, HG3G/4G
and HG2F.
• The USB interface on the HG2G-5F, HG3G/4G and HG2F supports only the 32-bit edition of Windows XP. It
does not support the 64-bit edition.
HG2G-5F HG3G HG4G
MICRO/I
Computer
USB cable
A plug Mini-B plug
To USB port To USB interface