IDEC High Performance Series - Manual (Page 615)

WindO/I-NV2 User’s Manual 10-103
7 Alarm List Display
10
Data Displa
ys
7.2 Alarm List Display Configuration Procedure
This section describes the configuration procedure for Alarm List Displays.
1 On the Home tab, in the Parts group, click Data Displays, and then click Alarm List Display.
2 Click a point on the edit screen where you wish to place the Alarm List Display.
3 Double-click the dropped Alarm List Display and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
To switch to Advanced mode, click Advanced.