IDEC High Performance Series - Manual (Page 1159)

WindO/I-NV2 User’s Manual 27-1
27
Maintenance
This chapter describes the web server function used during maintenance and Downloader.
1.1 Web Server Function Overview
The web server function remotely performs HG2G-5F, HG3G/4G maintenance using a web browser terminal such as a
computer or PDA.
• Monitoring
• Remote Control
• Remote Monitoring
1.2 System Composition
An example system configuration for using the web server function is shown below.
Configure the HG2G-5F, HG3G/4G Ethernet settings (IP address, netmask, default gateway) and connect to a local
network.
Chapter 27
Maintenance
1 Web Server Function (HG2G-5F, HG3G/4G)
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
(1) Access the HG2G-5F, HG3G/4G from a web browser connected to the local network to use the web server
function.
(2) When the local network is connected to an external network, configure the web browser connected to the remote
network with the local network’s gateway, router, and other settings. Access the HG2G-5F, HG3G/4G from the
remote web browser to use the web server function. For gateway, router, and other settings, contact the
administrator of the network the HG2G-5F, HG3G/4G is connected to.
Web Browser Terminal
(Computer, PDA, etc.)
Web Browser Terminal
(Computer, PDA, etc.)
Local Network Ethernet Communication (TCP/IP)
Remote Network
(1)
(2)
External Network
HG3G HG2G-5F HG4G HG3G HG2G-5F HG4G
External device
MICRO/I
External device
MICRO/I
Both the HG2G-5F, HG3G/4G and HG3F/4F can exist on the same local network.
When accessing the HG3F/4F to use the web server function, refer to “2 Web Server Function (HG3F/4F)”
on page 27-12.