IDEC High Performance Series - Manual (Page 1200)

1 Project Transfer Function
28-6 WindO/I-NV2 User’s Manual
1.4 Using Key Buttons, Multi-Buttons, or Multi-Commands to Transfer Project Data
●
Download
1 Create a project file for transfer (.ZNV) and save it on an SD memory card or USB flash drive.
For details, refer to “1.3 Converting Project Data for Transfer” on page 28-3.
2 Insert an SD memory card or USB flash drive in the MICRO/I.
3 Press the Key Button or Multi-Button or execute the Multi-Command configured with Download Project under Data
Transfer on the Key Browser dialog box.
●
Upload
1 Insert an SD memory card or USB flash drive in the MICRO/I.
2 Press the Key Button or Multi-Button or execute the Multi-Command configured with Upload Project under Data
Transfer on the Key Browser dialog box.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Allocate a Key Button, Multi-Button, or Multi-Command configured with the project transfer function to the
MICRO/I.

For details, refer to Chapter 8 “5 Key Button” on page 8-66.
 For details, refer to Chapter 8 “6 Multi-Button” on page 8-98.
 For details, refer to Chapter 12 “6 Multi-Command” on page 12-38.
HG3G HG2G-5F HG4G
SD Memory Card MICRO/I
USB flash drive
HG3G HG2G-5F HG4G
SD Memory Card MICRO/I
USB flash drive