IDEC High Performance Series - Manual (Page 377)

WindO/I-NV2 User’s Manual 8-53
4 Print Button
8
Bu
tton
s
4.3 Properties of Print Button Dialog Box
This section describes items and buttons in the Properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ >>OFF Text, >>ON Text
Applies the text entered in the Part Name field to the Text field under the OFF or ON fields on the Registration
Text tab. This is used as the Registration Text when the button is OFF or ON.
■ Output to
Select where to direct the screenshot to.
■ Action Mode
Select the behavior of the button from the following:
*1 This is applicable for models with the memory card interface only.
To specify the Registration Text to use when the button is ON, place a check in the Set by State check box
on the Registration Text tab. If left unchecked, the same Registration Text assigned for the OFF state is
displayed for the ON state as well.
Printer: Outputs the screenshot to the printer connected to the MICRO/I.
Memory Card *1 : Outputs the screenshot as a file to the memory card inserted in the MICRO/I.
Files are output as follows:
Series
File
format
File name File size
HG2G-5F
HG3G/4G
JPEG
CAP***.JPG (***: date and time when file was output)
Example: A file created at 18:50:25 on June 30, 2011
will be named “CAP110630_185025.JPG”.
Depends on
image being
displayed.
HG2F
Bitmap CAP***.BMP (***: serial number from 001 to 999)
77,878 bytes
HG3F 308,278 bytes
HG4F 481,078 bytes
• For details about printers, refer to Chapter 31 “Printer” on page 31-1.
• For details about memory cards, refer to Chapter 30 “1 Memory Cards” on page 30-1.
Print Screen: Outputs a screenshot of the current screen to the printer or the memory card.
Cancel Printing: Cancels printout to the printer.