IDEC High Performance Series - Manual (Page 790)

6 Multi-Command
12-54 WindO/I-NV2 User’s Manual
●
Trigger Condition Tab
When the condition has been or is satisfied, the command is executed; when not satisfied, the command is not
executed.
Example:
When Trigger Type is Rising-edge and Device is LM 0
The command is executed when LM 0 changes from 0 to 1.
■ Trigger Type
Selects the condition to execute the command from the following.
LM0:
MICRO/I
0
LM0: 1
Not
executed
Executed
Condition
Not
satisfied
Condition
Satisfied
Rising-edge: Command is executed when device changes from 0 to 1.
Falling-edge: Command is executed when device changes from 1 to 0.
Satisfy the condition: Command is executed when condition changes from not satisfied to satisfied.
Device value
1
0
Action Execution Execution Execution
Device value
1
0
Action Execution Execution
Action
Condition
Satisfied
Not satisfied
Execution Execution Execution