IDEC High Performance Series - Manual (Page 376)

4 Print Button
8-52 WindO/I-NV2 User’s Manual
4.2 Print Button Configuration Procedure
This section describes the configuration procedure for Print Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Print Button.
2 Click a point on the edit screen where you wish to place the Print Button.
3 Double-click the dropped Print Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.