IDEC High Performance Series - Manual (Page 987)

WindO/I-NV2 User’s Manual 20-23
4 Script Definition Method
20
Script
Draw (Continued)
Offset
Function Format Description
Drawing
of circle
and ellipse
CIRCLE( , , , ,
, , , ,
)
A circle with specified radius from center coordinate is drawn.
: Center coordinate X, : Center coordinate Y,
: X axis radius, : Y axis radius, : Line width,
: Line type, : Foreground color,
: Background color, : Pattern
• : Line width, : Line type, : Foreground color,
: Background color, : Pattern can be omitted.
• Specification of : Line width is as follows:
It will be set to 1 (1 dot) when omitted.
• Specification of : Line type is as follows.
It will be set to 1 (Solid) when omitted or when the line width is
set to anything other than 1 (1 dot).
• : Foreground color, : Background color is specified
by the color data. It will be set to 255 (white) when omitted.
For color data, refer to Appendix “1 Color Number
Correspondence Table” on page A-1.
• Specification of : Pattern is as follows.
It will be set to 0 (none) when omitted.
CIRCLE( , , , )
Function Format Description
Indirect
specification
OFFSET( , )
: Reference device
: Device to store the indirect value (0 to 32767)
Specify the device words from .
Indirect read
Specify OFFSET function to the right of the assignment statement.
Format example: = OFFSET( , )
Operation: Stores the value of device in words
from into .
Indirect write
Specify OFFSET function to the left of the assignment statement.
Format example: OFFSET( , ) =
Operation: Stores the value of into the device
words from .
• Store the value appropriate for the data type as the indirect
value. As an example, when the data type is BCD4, store the
indirect value of BCD4 into the device.
a b c d
e f g h
i
a b
c d e
f g
h i
e f g
h i
e
Set value 1 2 3 5
Line width 1 dot 2 dots 3 dots 5 dots
f
Set value 1 2 3 4 5 6
Line type Solid Dot Dash Long Dash
Long Dash
Dot
Long Dash
Dot Dot
g h
i
Set value 0 2 3 4 7 8
Line type None
Foreground
100%
Foreground
25%
Foreground
50%
Background
100%
Horizontal
lines
Set value 9 10 11 12 13
Line type
Vertical
lines
Slant
Upwards
Slant
Down-wards
Cross-hatch Tint
a b c d
a b
a
b
b a
c a b
b
a c
a b c
c
b a