IDEC High Performance Series - Manual (Page 803)

WindO/I-NV2 User’s Manual 13-5
1 Overview
13
Alarm Log Function
1.4 Data Configuration
The sampled data is composed of the channel number, message, alarm state, time, and label.
The relationship between the Alarm Log function settings and the sampled data is as follows.
1. Data storage amount: The amount of data that can be saved in the data storage area. For details, refer to “Data
Storage Amount” on page 13-8.
2. Channel No.: Composed of (Block No.)-(Channel No.). The devices to monitor and the conditions for alarm
occurrence and recovery are configured in the channels. When the sampled data is output as
a CSV file, the displayed label is “Ch.No.”.
3. Message: The message displayed when an alarm has occurred.
4. Alarm state and time: The alarm state (occurred, recovered, confirmed) and the time the alarm occurred, was
recovered from, and confirmed. When the sampled data is output as a CSV file, the
displayed label varies based on the output method.
5. Label: When the sampled data is output as a CSV file, this is the text displayed in the label row.
This cannot be changed.
Ś͘EŽ͘ DĞƐƐĂŐĞ KĐĐƵƌƌĞŶĐĞdŝŵĞ ZĞĐŽǀĞƌLJdŝŵĞ ŽŶĨŝƌŵĂƚŝŽŶdŝŵĞ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϬϬ͗Ϭϱ ϭϮͬϬϭϭϮ͗Ϭϭ͗ϭϬ ϭϮͬϬϭϭϮ͗Ϭϭ͗ϯϬ
 ϭͲϮ dĞŵƉĞƌĂƚƵƌĞĂďŶŽƌŵĂů ϭϮͬϬϭͬϮϬϭϭϭϮ͗Ϭϭ͗Ϭϵ ϭϮͬϬϭϭϮ͗ϬϮ͗Ϯϭ ϭϮͬϬϭϭϮ͗ϬϮ͗ϱϱ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϬϮ͗ϬϬ ϭϮͬϬϭϭϮ͗Ϭϯ͗ϭϭ ϭϮͬϬϭϭϮ͗Ϭϱ͗ϭϮ
 ϭͲϯ KǀĞƌĐƵƌƌĞŶƚ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϯϬ͗Ϯϭ ϭϮͬϬϭϭϮ͗ϱϱ͗ϭϱ ϭϮͬϬϭϭϯ͗ϬϬ͗ϬϬ
 ϭͲϭ sŽůƚĂŐĞĚƌŽƉ ϭϮͬϬϭͬϮϬϭϭϭϮ͗ϰϱ͗ϯϲ ϭϮͬϬϭϭϮ͗ϱϯ͗ϭϮ ϭϮͬϬϭϭϮ͗ϱϳ͗ϰϭ
ϭ͘ĂƚĂƐƚŽƌĂŐĞĂŵŽƵŶƚ
Ϯ͘ŚĂŶŶĞůEŽ͘
ϱ͘>ĂďĞů
ϯ͘DĞƐƐĂŐĞ ϰ͘ůĂƌŵƐƚĂƚĞĂŶĚƚŝŵĞ
Alarm Log settings
Sampled data