IDEC High Performance Series - Manual (Page 498)

2 Multi-State Lamps
9-18 WindO/I-NV2 User’s Manual
2.3 Properties of Multi-State Lamp Dialog Box
This section describes items and buttons on the properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Switching Method
Specify the method to switch drawing objects from the following:
*1 HG2G-S/-5S/-5F, HG3G/4G only
Bit: Switches the drawing object displayed, according to the status of the bits.
Example 1: Bit is selected. The bits triggered in device D0 corresponds to the following pictures and the
OFF state *1 is None.
Switches the picture to display according to the status of the bits.
bit15 bit0 bit3
Value of Trigger Device D0
Picture
State: 0 State: 1 State: 2
(None)
OFF
*1
Display picture
for bit 0
Display picture
for bit 1
Display picture
for bit 2
No picture
Display picture
for bit 1
Display picture
for bit 2
0001 0010 0100 1000 1110 1100
State: 0 State: 1 State: 1 State: 2 State: 2
Picture to display
Bit state of
Trigger Device D0
Action
I f m u l t i p l e b i t s a r e 1 ,
display the picture for the
lowest order bit.
If all bits in the device are 0 or if a
bit with no associated picture
becomes 1, display nothing.