IDEC High Performance Series - Manual (Page 1110)

2 Downloading
24-18 WindO/I-NV2 User’s Manual
Options dialog box
Download runtime system and additional fonts.
■ Download Runtime system
Select this check box to force download runtime system, irrespective of the runtime system version of the MICRO/I,
when downloading project data. Normally this option should not be used.
■ Download additional fonts
Select this check box to download additional fonts when downloading project data.
If this check box is selected, the following additional fonts can be selected for download to the MICRO/I.
Japanese Large Font (First standard), Japanese Large Font (Second Standard), Chinese, Taiwanese,
Korean, European Large Font, Central European, Baltic, and Cyrillic.
• For details about additional fonts, refer to Chapter 2 “Installed Fonts in the MICRO/I” on page 2-7.
• Clear the Download Additional Fonts check box, to delete all additional fonts that have been
downloaded to the MICRO/I.
• The additional fonts downloaded to the MICRO/I whose check box is cleared will be deleted from the
MICRO/I.
Target font size (byte): Shows the total size of the basic fonts and selected additional fonts.
If no additional fonts are selected for download to the MICRO/I, shows the size
of the basic fonts.
Downloadable project size (byte): Shows the amount of project data that can be downloaded. This figure varies
according to the additional fonts selected.
Target Font Information: Confirms the additional fonts installed on the MICRO/I.